tesakrepp® 4341 Temperature-Resistant Masking Tape for Painting with Subsequent Drying up to 140°CProduct Description tesakrepp® 4341 is a lightly creped, highly stretchable and flexible paper masking tape. The solvent-free product is coated with a natural rubber adhesive, providing strong initial tack and ensuring the adhesion of heavy masking paper. Additional practical features such as resistance to wet sanding and excellent paint and filler adhesion are also present. Even after oven drying, tesakrepp® 4341 can be easily removed. Main Applications Masking for painting tasks with subsequent drying up to 140°C when using solvent-based and water-based paints. Storage Store for up to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity. Larger quantities are available upon request.

Product Descriptiontesapack® 4120 is a packaging tape based on a PVC film with a strong natural rubber adhesive. tesapack® 4120 is characterized by the following properties:Unrolling evenly and quietly Very well suited for use with all common hand dispensersMain ApplicationEasy manual handlingUniversally applicable for sealing medium-weight shipping boxesTechnical PropertiesThickness49 µmAdhesiveNatural rubberCarrier materialPVC filmAdhesion to steel2N/cmColorsBrown and TransparentPropertiesElongation at break75%Tensile strength43N/cmSuitable for freezingyesQuiet unrollingyesAutomatic applicationyesPackaging weightup to 25 kgTearability by handVery goodManual applicationsyesStorage Up to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity. Larger quantities are available on request.

Product Descriptiontesafilm® 4156 PV1 is a tear-resistant specialty adhesive film for masking and covering work in lithography. The product is available in Litho-red (57). tesafilm® 4156 PV1 is light- and aging-resistant and can be quickly and cleanly removed. Due to its backside coating, it unwinds easily and does not tend to curl at the edges. Provides secure and sharp-edged coverage. Transparent to the human eye, even without backlighting, so the areas covered by the tape remain visible. Due to its special adhesive properties, tesa® 4156 PV1 is very suitable for initial bonding of films. Technical PropertiesThickness50 µmColorLitho-redAdhesiveNatural rubberCarrier materialCellophane StorageUp to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity.Larger quantities are available on request.

Product Descriptiontesaflex® 4163 is a special insulating tape made of soft PVC for electrical installations and insulation, as well as being multifunctional for repair work. The UV-resistant acrylic adhesive gives the tape a certain weather resistance, making it suitable for long-lasting applications. tesaflex® 4163 is also resistant to acids and solvents. Main Applicationstesaflex® 4163 is a versatile repair and multipurpose tape for a variety of uses:RepairsMarkingSplicing applicationsBundlingIdeal for electrical installation and insulation workIsogenographic tesaflex® for color-matching processing in installtion work, e.g. heating pipesTechnical PropertiesThickness126 µmAdhesiveAcrylicCarrier materialSoft PVCAdhesion to steel1,8N/cmPropertiesElongation at break295%Tensile strength30/cmDielectric strength7.000 VStorageUp to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity.

Product Descriptiontesa® 4169 is a tape with a soft PVC carrier and an acrylic adhesive. It is particularly suitable for durable, demanding markings as well as for outdoor applications/UV resistance. Depending on the color choice, tesa® 4169 can be used as a floor marking tape or as a warning tape. tesa® 4169 is available in blue, white, red, green, yellow, and yellow/black colors. Main ApplicationsDelimiting work areas, e.g. ub factories and warehousesGuide tape for optically contolled transport vehiclesDividing sports halls into playing fieldsMarking parking spaces and aisles in factory halls, trade fairs, and hospitalsTechnical PropertiesThickness187 µmAdhesiveAcrylicCarrier materialSoft PVCAdhesion to steel2N/cmPropertiesElongation at break285%Tensile strength42,5N/cmSuitable for rough surfacesgoodStorge Up to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity.

Product Descriptiontesa® 4174 is a very thin, temperature-resistant PVC fineline marking tape with natural rubber adhesive. It does not shrink and is easy to remove without leaving residue. PropertiesPowerwash resistanceSharp color edgesFlame resistanceEasy to removeTearable by handMain ApplicationsMasking during painting, such as bumpersFor sharp color edges in multi-color paintingFor tight curves and complex 3D bondingTechnical PropertiesCarrier materialPVC filmThickness110 µmAdhesiveNatural rubberTemperature resistance150°C StorageUp to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity.Larger quantities are available on request.

Product Descriptiontesaflex® 4244 is a highly flexible specialty masking tape for plastic parts and multi-color painting. tesaflex® 4244 is a very flexible soft PVC film with a rubber adhesive, easily and cleanly removable. It provides sharp-edged masking on painted and unpainted plastics, as well as metal surfaces during multi-color painting. Suitable for 3D surfaces. Main ApplicationsMasking during painting, such as bumpersFor sharp color edges in multi-color paintingFor tight curves and complex 3D bondingTechnical PropertiesCarrier materialPVC filmThickness110 µmAdhesiveNatural rubberTemperature resistance150°C Storage Up to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity.Larger quantities are available on request.

Product Descriptiontesa® is a tear-resistant strapping tape based on a MOPP film with a natural rubber adhesive. The tesa® 4287 stands out with the following features:Good tear resistance with low elongationResistant to acids and alkalisGood heat and cold resistanceEasy and clean removal from many surfaces Applications Sealing of heavy packagesPallet securingStrapping of electronic componentsGalvanizing of metallic surfaces Technical PropertiesCarrier materialMOPPAdhesiveNatural rubberTotal thickness79 µmElongation at break35%Adhesion to steel4N/cmTensile strength180N/cmFeaturesResidue free romovalYesNon- discoloringYesWater resistanceVery good  StorageStore for up to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity. Larger quantities are available upon request.

Product Descriptiontesa® 4288 is a highly tear-resistant strapping tape based on a MOPP film with a natural rubber adhesive. The tesa® 4288 stands out with the following features:High tear resistance with low elongationGood heat and cold resistanceHigh UV resistance due to the black carrier, suitable for outdoor applicationsEasy and clean removal from many surfaces Applications Sealing of heavy packagesSurface protection and fixation of metals during processingBundling of heavy pipes, strappingPallet securingCoil-end bonding Technical PropertiesCarrier materialMOPPAdhesiveNatural rubberTotal thickness114 µmElongation at break35%Adhesion to steel5N/cmTensile strength300N/cm Features Residue-free removalYesNon discoloringYesWater resistanceVery good StorageStore for up to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity. Larger quantities are available upon request.

Product Descriptiontesa® 4289 is an extremely tear-resistant strapping tape based on a MOPP film with a natural rubber adhesive. The tesa® 4289 stands out with the following features:Very high tear resistance with low elongationThick and abrasion-resistant filmGood heat and cold resistanceHigh adhesive strength for bonding on a variety of surfacesEasy and clean removal from many surfaces Applications Bundling of the heaviest pipesSealing of the heaviest packagesStrapping of heavy goods during palletizingCoil-end bondingRim tape Technical Properties Carrier materialMOPP AdhesiveNatural rubber Total thickness: 114 µm Elongation at break35% Adhesion to steel5N/cm Tensile strength 420N/cm Temperature resistance -35°C to +80°C StorageStore for up to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity. Larger quantities are available upon request.

Product Descriptiontesa® 4541 is a high tear-resistant, uncoated cloth tape. It consists of a 145 mesh cellulose fabric carrier and a natural rubber adhesive. tesa® 4541 is an especially flexible and smooth cloth tape, suitable for a wide range of applications. Product FeaturesGood adhesion even on roigh and oily surfacesConformes to surfaces without wrinklingEasy to label, ideal as marking tapeClassified according to FMVSS 302:SE/NBRMain ApplicationsUsed in the manufacturing of protective equipmentReinforcement of book covers and hockey sticksAttchment of shin guardsTechnical PropertiesThickness270 µmAdhesiveNatural rubberCarrier materialOpen fabricAdhesion to steel3,6N/cmPropertiesElongation at breal16%Tensile strength90N/cmAbrasion resistancegoodMesh145Apperance of backing (visual)matteLabelingyesTemperature resistance(30 minutes)130°CTemperature resistance (removabilityfrom aluminium after 30 minutes exposure)130°CStorageUp to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity. Larger quantities are available on request.

Product Descriptiontesaband® 4651 is a high-performance premium cloth tape with a plastic coating, made from a particularly high-quality 148 mesh cellulose fabric carrier and a natural rubber adhesive. FeaturesStrong adhesive power, even on rough surfacesExcellent tensile strengthFlexible and abrasion-resistantWeather- and water- resistant, as well as aging- resistantEasy to label and tear by handAvailable in eight colorsBlackWhite GrayYellowRedBlueGreenBrownMain ApplicationsColors coding, markingBundling, fastening, bandaging, reinforcing, tying, and fixingSealing drill holes, slots, openings, and ventilation ductsNoise and abrasion protection, base band for refrigeratiors and kirchen ccabinetsProtection from sharp-edged objects (for work safety)Technical PropertiesCarrier materialAcrylic- coated fabricAdhesiveNatural rubberMesh148Total thickness0,31 mmStorage Up to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity. Larger quantities are available on request.

Product Descriptiontesaband® 4657 is a high-quality, plastic-coated specialty cloth tape made from a 145 mesh cotton fabric carrier and a heat-curing natural rubber adhesive. tesaband® 4657 is resistant to high thermal and mechanical stresses, while maintaining flexible structures. FeaturesExtremely high thermal resistanceVery high aging resistanceEasy and quick to remove (especially advantageous in a warm state)Very easy to handle, flexible, and stableExcellent resistance to paint solventsMain ApplicationsHigh-temperature applications, e.g., masking in vehicle and machinery manufacturing, multiple oven drying possibleMasking of window flanges, threaded holes, and drilled holesPermanent masking of exterior and interior fittingsPartial masking during treatment with impregnating agentsCable fixation, e.g., headliner, door panels, mirrorsMasking during powder coatingTechnical PropertiesCarrier materialAcrylic- coated- fabricColorGrayAdhesiveNatural rubber, heat- curingMesh148Total thickness290 µmElongation at break7,5%Adhesion to steel4,6N/cmTensile strength105N/cmTemperature resistance(30 minutes)180°CPropertiesTearable by handsyesStraight tear edgeyesEasy to removeyesStorage Up to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity. Larger quantities are available on request.

Product Descriptiontesaband® 4660 is a specialty plastic-coated cloth tape with a printable surface. It consists of a 145 mesh cotton fabric and a heat-curing natural rubber adhesive. tesaband® 4660 is particularly suitable for flexographic printing and is also highly suitable for the production of die-cut parts. Features High adhesion to almost all surfaces Flexible yet largely resistant to substances like plasticizers and oil fumes High temperature resistance High tensile strength Very good printability of the backside Easy to tear by hand, smooth tear edges Main Applications Marking in switch cabinets Bundling and marking of electrical insulation and cables Marking of electrical components Sealing of cans and ducts Labeling with printed die-cut parts Suitable for almost all types of printing Sustainability Aspects 68% bio-based content in the total product (excluding internal packaging, by weight) Technical PropertiesType of backingPaperThickness260 µmBacking colorYellowAdhesiveNatural rubberCarrier materialAcrylic- coated- fabricMesh145Adhesion to steel4N/cmPropertiesElongation at break7,5%Tensile strength100N/cmStraight tear edgevery goodTearable by handvery goodAbrasion resistancevery good LabelingyesTemperature resistance(30 minutes)180°CTemperature resistance(removability from aluminium after30 minutes exposure)180°CEasy to removeyesDie- cutting yes StorageUp to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity. Larger quantities are available on request.

Product Descriptiontesa® 4661 is a strong, acrylic-coated cloth tape. It consists of a viscose fabric carrier with a mesh density of 148 and a natural rubber adhesive. tesa® 4661 is an all-purpose cloth tape suitable for a wide range of applications, often used for bundling components. Main Applications Marking of wires and cablesBundling of pipes, etc.Protection from noise and abrasionCable harnessesColor codingSecuring sharp edgesSealing of cartons, cans, and tubesStrapping of components, nails, screws, bicycles, rims, etc.Floor markingSandblastingFloor coating Sustainability Aspects 60% bio-based content in the total product (excluding backing, by weight)Technical PropertiesThickness300 µmAdhesiveNatural rubberCarrier materialAcrylic- coated- fabricMesh145Temperature resistance(30 minutes)140°CTemperature resistance (removabilityfrom aluminium after 30 minutes exposure)140°C PropertiesElongation at break12%Tensile strength100N/cmAbrasion resistancevery goodStraight tear edgevery goodLabelingyesWater resistancegoodEasy to removeyesAdhesion to steel5,8N/cmTearable by handvery goodStorage Up to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity. Larger quantities available upon request.

Product Descriptiontesaband® 4688 is a PE-extruded standard fabric tape. It is made from a 55 mesh PET/cellulose fabric backing and a natural rubber adhesive. tesaband® 4688 is a typical repair tape that can be used in a variety of applications and has excellent processing properties. Available in two colors: GrayBlack Product Features High adhesive strength, even on rough surfacesWater- and aging-resistantFirm yet flexibleEasy to tear by handEasy to unwindTotal halogen content < 1000 ppmTotal sulfur content < 1000 ppm Main Applications Marking, covering, packaging, protecting, and fixingSealing boxes, cans, etc.Bonding construction filmsBundling cablesSplicing filmsMarking parts during maintenance work in nuclear power plantsPropertiesElongation at break9%Tensile strength52N/cmDielectric strength2900VWater resistancegoodAbrasion resistancegoodStraight tear edgegoodHand- tearability goodTechnical SpecificationsType of backingnoneThickness260 µmAdhesiveNatural rubberBacking materialPE- extruded fabricTemperature resistance(30 minutes)110°CTemperature resistance(removal from aluminium after30 minutes exposure)110°CMesh55 Additional Information Complies with LV 312-1 voltage withstand 7500 volts (3 layers) requirementsMeets Siemens AG standard TLV 9027/01/06 for use in nuclear power plants StorageUp to 12 months after delivery in unopened original cartons. For larger quantities, please contact us for a quote.

Product Description Abrasion-resistant anti-squeak and sliding adhesive tape tesa® 51206 is a transparent PE-UHMW film with an acrylic adhesive.Highly abrasion-resistantVery slipperyResistant to acids, alkalis, and aggressive gasesMain ApplcationsUsed in the transport, packaging, printing, plastic, aluminium, and textile industriesSliding assistance in sliding roofs, copiers and fax machines, coin and cigarette vending machinesProtection of cable sets in areas with high frictionNoise and wear reduction in mounted componentsEquipment for convveyor beltsNoise damping in filling systems and packing stationsPropertiesElongation at break300%Tensile strength43N/cmAbrasion resistancevery goodTechnical PropertiesType of coverwhiteThickness114 µmColortranslucentAdhesivepure acrylicCarrier materialPEAdhesive to steel4,3N/cm StorageUp to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity. Larger quantities are available on request.

Product Descriptiontesafix® 51571 is a double-sided adhesive tape with a nonwoven carrier and a synthetic rubber adhesive. The product is suitable for permanent bonding of metals and plastics where high temperature stress does not occur. The high adhesive mass allows bonding on rough and structured surfaces and shows high initial tack. Main ApplicationsSelf-adhesive equipping of pouch bags, continuous forms, postersBonding of evaporators in refrigeration device production Technical PropertiesCarrier materialNonwovenAdhesiveSynthetic rubberColorTranslucentTotal thickness160 µm Storage Up to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity. Larger quantities are available upon request.

Product Descriptiontesa® 51606 is a thick, fluffy PET fleece adhesive tape with a natural rubber adhesive. It is specifically designed for cable wrapping applications in vehicle interiors and for battery modules in electric vehicles. Main FeaturesExcellent noise reductionHigh abrasion resistanceExcellent water absorptionOutstanding thermal insulationColor: Black Main Applications Cable wrapping in vehicle interiors and for battery modules in electric vehicles. Technical SpecificationsThickness800 µmAdhesiveNatural rubber basedCarrier materialPET fleeceAdhesive strength on steel5,5N/cmPropertiesElongation at break85%Tensile stremgth55N/cmUnwinding force (roll width > 9mm)7,5N/roll (30m/min)Temperature resistance min.-40°CTemperature max.105°CAbrasion resistance (5mm pin, LV312)Class CAbrasion resistance (10mm pin, LV312)Class DNoise damping (LV312)Class DThermal conductivity x- y direction0,066W/mk StorageUp to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity.

Product Descriptiontesafix® 51970 is a variant of tesafix® 4970, but with a carrier made of specially oriented polypropylene film. The proven product characteristics, such as high adhesive strength for permanent bonding, even on rough substrates, are also maintained here. Main ApplicationsBonding of wood and plastic profilesBonding of heavy decoration items and displaysBonding of scales and signsEndless bonding of thin sheets and films Technical PropertiesCarrier materialPP FilmAdhesiveModfied acrylicColorTransparentTotal Thickness220 µm Storage Up to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity. Larger quantities are available upon request.

Product descriptionThe tesa® Table Dispenser 6012 is a versatile tabletop dispenser designed for use with tesapack® and tesafilm® adhesive tapes. The tesa® Table Dispenser 6012 features the following propertiesRobust metal dispenserExtra-wide dispensing edge prevents tape ends from sticking when using two rollsBlade cover reliably protects against injuries when not in useFlexible attachment using a clamp (e.g., on the edge of a table) or by screwing it inCan be equipped with either one roll (66m-50mm) or two rolls (66m-25mm)Space-saving design Main applicationsThanks to the practical mounting using a clamp or screws, the tesa® Table Dispenser 6012 is highly versatile and requires little space. Maximum roll diameter: 145mmMaximum roll width: 25mm or 50mm Properties Drive typeManualMaximum roll width50mmCore diameter3Maximum roll diameter 145mmPurposePackagingWeight610g

Product Descriptiontesafix® 62932 is a double-sided PE foam adhesive tape for structural bonding. It offers excellent long-term adhesive strength for demanding assembly applications, even when overcoming construction tolerances. tesafix® 62932 provides benefits for various industrial applications:The thin foam carrier compensates for small unevennessesHigh initial tack for quick and reliable bonding, even with low pressureThe particularly conformable foam carrier compensates for gap tolerances and uneven surfacesHigh final adhesive strength for secure bondsExcellent moisture resistanceGood damping properties provide safety during transport and everyday use Main Applications Bonding of wood and plastic profilesBonding of heavy decoration items and displaysBonding of scales and signsEndless bonding of thin sheets and films Technical PropertiesCarrier materialPE FoamAdhesiveModified acrylicColorBlackTotal Thickness500 µm Storage Up to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity. Larger quantities are available upon request.

Product Descriptiontesa® ACX 7054 is a double-sided transparent acrylic adhesive tape. The product stands out due to its very high transparency and is therefore especially suitable for structural and permanent bonding of glass or transparent plastics. The different thermal expansions of the materials to be bonded are very well compensated by the viscoelastic acrylic core. The product has high initial and final adhesive strength. Main ApplicationsPermanent fixation of transparent and translucent materials, including: Signage and display manufacturingInstallation of glass partitionsFixing of decorative glass panels Technical PropertiesType of backingSilicon free filmThickness500 µmColorTransparentAdhesivePure acrylicAdhesion to steel(after 3 days)18N/cmCarrier material Rigid acrylic StorageStore for up to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity. Larger quantities are available upon request.

Product Descriptiontesa® ACX 7055 is a double-sided highly transparent adhesive tape with an acrylic core, designed for bonds that require seamless and optically clear surfaces. Translucent and transparent materials like glass or acrylic can be easily bonded with tesa® ACX 7055. Main ApplicationsExamples of mounting applications in various industries (e.g., extruders, household appliances, interior design, signage) Extruded profilesAttaching signagePilssee profiles Technical PropertiesType of backingSilicone free filmThickness1.000 µmColorTransparentAdhesivePure acrylicCarrier materialRigid acrylicAdhesion to steel(after 3 days)24N/cm StorageStore for up to 12 months after delivery in unopened original cartons at 20°C and 50% relative humidity. Larger quantities are available upon request.