Tesa® HAF 8410 60µm reactive heat-activated film
€9.52
Available, delivery time: 1-3 days
Product information "Tesa® HAF 8410 60µm reactive heat-activated film"
Product Description
tesa® HAF 8410 is a heat-activatable film based on nitrile rubber and phenolic resin, and is covered with a paper liner.
The material is non-adhesive at room temperature, making it easy to cut and punch. The process temperature for pre-fixing is approximately 90°C. In a second processing step, the product is applied under heat and pressure.
After full curing, tesa® HAF 8410 achieves extremely high bond strength as well as excellent temperature and chemical resistance. The adhesive joint remains elastic.
Main Applications
tesa® HAF is specifically designed for the implementation of chip modules in smart cards.
Additionally, the product is suitable for bonding temperature-resistant materials such as:
- Metal
- Glass
- Plastic
- Wood and textiles
Technical Properties
| Liner Type | Release paper |
| Thickness | 60 µm |
| Adhesive | Nitrile rubber & phenolic resin |
| Color | Amber |
| Carrier Material | None |
| Peel Strength | 12N/cm² |
| Dynamic Shear Strength | 12N/cm² |
Processing
-
Pre-lamination
tesa® HAF becomes tacky between approximately 90°C and 110°C. -
Curing
Bonding parameters—temperature, pressure, and time—depend on the application and the materials being bonded. As a guideline:-
Splicing Applications:
-
Temperature: 120°C - 200°C
-
Pressure: > 2 bar
-
Time: 15 sec. - 30 min.
-
-
Bonding of Clutch Linings:
-
Temperature: 180°C - 230°C
-
Pressure: > 6 bar
-
Time: 1 min - 30 min.
-
-
For maximum bond strength, surfaces should be clean and dry.
Storage Conditions In accordance with tesa® HAF durability concept.
Larger quantities are available upon request.
Login